home products documents about us contact us
Home > Machine products for wire harness processing > CASTUGNON series cutting and stripping and crimping machine for wire >
CASTUGNON C555SZ cut and strip and crimp and wire seal machine for wire

C555SZ Automatic wire seal and crimp machine

c555sz
castugnon c555sz processing

Stable wire seal processing


C555SZ process both end wire crimp and front end inserting wire seal that a lot of kinds of type automatically.

DF-01 Wire seal processing unit


C555SZ is equipped with DF-01 that is a wire seal processing unit of the new development. It receive a high evaluation from users.

Equipped CHA and CFM


C555SZ installed DF-01 wire seal unit, based on C551SZ. so it is also equipped with CHA Crimp height auto adjust unit that can memory and reproduce the ram height, CFM Crimp force monitor that check the pressure of crimping terminal.

CFM Crimp force monitor   ※test data sample

cfm

No crimping terminal


When crimper crimp without crimping terminal, the crimp pressure does not break out. Then the curve is displayed flat.
cfm

Cutting conductor


If the machine cut wire conductor more than 10% when stripping a wire insulation by blade, the crimping pressure is lower. Then the curve is displayed lower at the top.
cfm

Crimping insulation


If crimper crimp with wire insulation together when the wire position is deep to crimp terminal, the crimping pressure is up. Then the curve is displayed up from a beginning to the top.

DF-01 Wire seal supply and insert unit

DF-01 Wire seal supply and insert unit

Wire seal supply Disc feeder

Kodera original disc feeder perform stable wire seal supply from small wire seal like a 025 type to big wire seal like a 090 type than straight feeder as other wire seal machine.

Wire seal insert pin & chuck

After supply a wire seal by disc feeder, Carry pin pick a wire seal and Carry chuck that was made to from the shape of wire seal grip a wire seal from Carry pin certainly, and then Carry chuck insert a wire seal to a cutting wire.

Specifications

Model C555SZ
Processing Variation Front end : Cut, Strip, Terminal Crimping, Wire seal insert
Rear end : Cut, Strip, Terminal Crimping
Stripping Length Front : 0.1mm ~30mm / Rear : 0.1 ~ 20mm
Cutting Length max 99,999mm
Cutting Tolerance ±( 0.2 + 0.002 × L )mm
Minimum Processing Length L ≧ 25mmminimum length
Wire Size AWG #12(3.5sq) ~ #32(0.03sq)   ※Depend on the wire type.
Wire Type AVSS, AVS, AV, CAVUS, KV, KIV, UL, Teflon, etc
Crimper Capacity 2.5ton
Crimper Stroke 30mm or 40mm
Terminal Type Open barrel side feed/end feed type    ※max 27mm
Power Supply AC200 or 220 or 240V    50/60Hz
Power Consumption rated : 400W / max : 1,750W
Air Supply 35Nl/min   0.5MPa
Equipment   CFM Crimp force monitor, CHA Crimp height auto adjust unit,
DF-01 Wire seal insertion unit
Dimension 1,090 x 780 x 1,550mm
Weight 480kg