home products documents about us contact us
Home > Machine products for wire harness processing > CASTUGNON series cutting and stripping and crimping machine for wire >
CASTUGNON C550SZTS cut and strip and crimp and solder machine for wire

C550SZTS Wire crimping and dipping machine

C550SZTS
castugnon c550szts processing

High quality soldering machine


C550SZTS process front end crimping and rear end twisting and soldering automatically with high quality.

CASY-645 Wire twisting unit


CASY-645 twist a wire conductor by K blade that grip and slide a wire insulation at half strip by upper and lower flat blade. It can adjust from soft and hard on control panel.

SUA Wire solder unit


CS-055 rotating soldering bath and sponge roller fluxing unit process beautiful soldering than other machine.

Equipped CHA and CFM


CFM Crimp force monitor   ※test data sample

cfm

No crimping terminal


When crimper crimp without crimping terminal, the crimp pressure does not break out. Then the curve is displayed flat.
cfm

Cutting conductor


If the machine cut wire conductor more than 10% when stripping a wire insulation by blade, the crimping pressure is lower. Then the curve is displayed lower at the top.
cfm

Crimping insulation


If crimper crimp with wire insulation together when the wire position is deep to crimp terminal, the crimping pressure is up. Then the curve is displayed up from a beginning to the top.

SUA Wire soldering unit

sua soldering unit

CS-055 Rotating solder pot


Kodera original solder bath is always rotate when solder temperature is up to target degree, and there is a filter plate for cleaning the solder surface in the soldering pot. so It can always keep clean the solder surface.

sua soldering unit

Specifications

Model C550SZTS
Processing Variation Front end : Cut, Strip, Terminal Crimping
Rear end : Cut, Strip, Twisting, Soldering
Stripping Length Front : 0.1mm ~30mm / Rear : 0.1 ~ 30mm
Cutting Length max 99,999mm
Cutting Tolerance ±( 0.2 + 0.002 × L )mm
Minimum Processing Length   L ≧ 25mmminimum length
Wire Size AWG #12(3.5sq) ~ #32(0.03sq)   ※Depend on the wire type.
Wire Type AVSS, AVS, AV, CAVUS, KV, KIV, UL, Teflon, etc
Crimper Capacity 2.5ton
Crimper Stroke 30mm or 40mm
Terminal Type Open barrel side feed/end feed type    ※max 27mm
Power Supply AC200 or 220 or 240V    50/60Hz
Power Consumption rated : 510W / max : 1,650W
Air Supply 45Nl/min   0.5MPa
Equipment   CFM Crimp force monitor, CHA Crimp height auto adjust unit,
CASY-645 Wire twist unit, SUA Wire soldering unit
Dimension 1,120 x 765 x 1,550mm
Weight 355kg