home products documents about us contact us

C385A Cable cut and stripping machine

c385a

Belt feed


C385A is attached the feeding Belt, based on old model C375. It can measure more stable for the wire and cable that the surface has an irregularity than roller feed. It is a new model from C355, C375, C385.

Special R blade


C385A can use special R blade with cable guide that fitting the cable, so it can process cable stripping more stable than V blade.

Processing Capacity

Total Length Processing Capacity
700mm 891 pcs/hour
1,000mm 769 pcs/hour
1,500mm 628 pcs/hour
2,000mm 530 pcs/hour
3,000mm 405 pcs/hour
                           ※Processing condition:
                           Front/Rear strip length 100mm, Front/Rear half strip length 50mm, Speed 9

Catalog

CASTING series specifications

Specifications

Model C385A
Stripping Length Front : max 1,500mm/Rear : max 210mm   ※Half strip only
Cutting Length 210 ~ 99,999mm
Cutting Tolerance ±( 0.1 + 0.0005 × L )mm
  Minimum Processing Length   L ≧ 210mmminimum length
Wire Size AWG #7(10sq) ~ #28(0.08sq)   ※Depend on the wire type.
Wire Diameter max φ11mm   ※Depend on the wire type.
Wire Type ABS wire, Air bag wire, Shield cable, Cabtire cable, etc
Power Supply AC100 ~ 240V    50/60Hz
Air Supply 0.06Nl/1 cycle   0.5MPa
Optional equipment none
Dimension 716 x 430 x 266mm
Weight 44kg